About Our Seattle Service
Mounting a TV above a fireplace in Seattle requires careful planning for heat management and wall structure. Seattle homes range from older masonry fireplaces to modern gas insert units, we handle all types daily throughout Capitol Hill, Queen Anne, and Ballard.
Heat is the main concern: we use a minimum 12-inch gap above the fireplace opening and measure actual heat output with a thermal gun before drilling. For wood-burning fireplaces, we often recommend a pull-down mount (MantleMount or similar) so the screen tilts toward eye level.
Fireplace Types We Mount In Seattle
- Gas insert fireplaces with drywall surrounds: most Eastside homes in Sammamish, Redmond and Issaquah have a gas insert in a framed chase, where the bracket lags into two studs and the cable can drop inside.
- Standard brick fireplaces: brick fireplaces in Ballard, Wedgwood and Shoreline ramblers get sleeve anchors set into the brick faces, never the joints.
- Stone fireplace surrounds: ledgestone and river-rock fireplaces common in 1970s Bellevue homes need anchors in solid stone or the block behind, with the bracket shimmed flat.
- Stucco or plaster surrounds: Craftsman and Tudor homes in Queen Anne and Capitol Hill have tile or plaster over brick above the mantel; we drill tile with a diamond bit and anchor into the brick.
Pricing in Seattle
| Service | Price |
|---|---|
| Above-fireplace mounting, 32"–59" TV | from $218 |
| Above-fireplace mounting, 60"+ TV | from $238 |
| Brick or stone fireplace wall | +$69 |
| In-wall wiring above the fireplace | +$149 |
| Pull-down / MantelMount-style mount | custom quote |
Get an Exact Quote for Your Seattle Home
Answer 3 quick questions, we'll text you a price in under 2 minutes.
Call +1 (206) 258-6297Service Areas in Seattle
Frequently Asked Questions
How high above a fireplace should a TV be mounted in Seattle?
Leave at least 12 inches between the top of the firebox and the bottom of the TV, and more if the wall gets hot. Seattle fireplaces run much of the year, so we read the wall temperature with the insert on high before choosing a height. For tall Eastside great rooms, a pull-down mount is often the better fit.
Can you mount a TV above a brick fireplace in Seattle?
Yes. Brick fireplaces are common in Seattle's postwar ramblers and Craftsmans. We drill the brick faces with a hammer drill and a vacuum at the bit, set sleeve anchors rated for the TV, and never rely on the mortar.
Does Seattle weather affect TV mounting above a fireplace?
Rain doesn't matter indoors, but earthquakes and heat do. Every bracket lands on two studs or solid masonry, and we check where the flue runs inside the chase before drilling, then keep the screen above the hottest air.
How much does fireplace TV mounting cost in Seattle?
A 32–59 inch TV over a fireplace is $218, and 60 inches and up is $238. Stone, brick or tile adds $69, and running the cables inside the chase adds $149. The two-minute quiz gives you an exact Seattle price.
Do you serve all Seattle neighborhoods for fireplace TV mounting?
Yes, from Ballard and Capitol Hill to West Seattle, Queen Anne, Wallingford and Magnolia, plus Bellevue, Kirkland, Redmond, Sammamish, Issaquah, Renton, Shoreline and Everett. Morning calls often get a same-day fireplace install, depending on the bridges.
TV Above the Fireplace in Seattle and the Eastside
Fireplace TV mounting near me in Bellevue, Kirkland or Renton?
Yes, those are among our most frequent fireplace addresses around Seattle. Most homes have a gas insert in a brick, stone or drywall surround.
Older brick fireplace in Seattle?
We drill into the brick with carbide bits and use masonry anchors (+$69). A 65-inch over brick is $307.
Price for a 75" over the fireplace with hidden wires
$427 with two technicians on a framed chase: $229 for the TV, $49 for the fireplace and $149 for in-wall wiring.
Soundbar below the TV?
Yes, a soundbar mount is $79. We check that it fits between the mantel and the screen.
Fireplace Installs Across Greater Seattle
Gas inserts are everywhere in Eastside and Snohomish County homes built in the last thirty years, and the wall above them is the obvious place for the TV. These three show the variations we run into.
60" on a full-motion arm above a Mill Creek fireplace
The family wanted to pull the screen down and out when watching from the dining table. We removed an old mount first, then set an articulating arm above the mantle with enough clearance that the TV clears the mantle edge when folded back.
Redmond living room: 55" over the hearth on an articulating mount
A modest screen, but the room is long and the couch sits off to one side. An articulating bracket lets the TV angle toward the seating instead of staring at the opposite wall, and we kept the mount inside the stud bay directly above the firebox.
Tile, a wall shelf and an in-wall run over a Kirkland fireplace
A 75" above a tiled surround, a floating shelf beneath it for the streaming box, and power and HDMI hidden inside the wall. Two technicians shared the tile drilling and the lift so the big panel never rested on the mantle.
Before we mount over your Seattle-area fireplace
Run the fireplace for 15 minutes and hold your hand where the TV bottom will sit, if it is too hot to keep there, the TV needs a mantle shelf, a pull-down mount or a different wall. Many newer Puget Sound homes have a framed chase above the insert, which gives us studs to anchor into.
Seattle Fireplace Installs, Step by Step
A 60" swing arm over a fireplace with a PS5 and soundbar in Bellevue
A Bellevue townhouse where the gas fireplace sits in a corner. The owner wanted the 60-inch on a swing arm over it, so it can turn toward the sofa or the dining table, plus a PS5 bracket and a soundbar from our stock.
The technician arrived 45 minutes after booking. A swing arm over a fireplace has to clear the mantel at every angle, so he measured the mantel depth and the arm's reach first. He checked the heat with the insert on high, scanned the chase and lagged the arm into two studs.
The cable runs down inside the chase with a service loop, so it follows the arm without pinching. The PS5 bracket went beside the fireplace, and the soundbar mounts to the arm so it moves with the TV.
The arm was swung through its full range, the PS5 was tested at 4K, and the hearth was vacuumed.
An old TV out and a 55" in over a Bothell fireplace
The old TV over the fireplace had its wires hanging down the front. The customer wanted a new 55-inch, a soundbar and the wires fished inside the wall.
The technician arrived 30 minutes after the call. He took the old TV and bracket down, checked the heat, scanned the chase and fished the cables down to a plate beside the hearth. The new bracket went into studs, and the soundbar went on top of the mantel line.
Both were tested, and the old holes were filled.
Customer Reviews
Evans was professional and did an amazing work. He was very fast and informative
Best TV mounting service, and very well made and user friendly website. I left my number, the guys contacted me in no time. And I got a better rate than other companies in the area!
Roman was amazing! He installed all the TVs and provided additional equipment that was needed!
Very Professional and Precise.
Evan was prompt, efficient, and helpful. Highly recommend him and definitely will use in the future.

















