About Our Seattle Service
Apartment TV mounting in Seattle requires extra care, minimal wall damage, clean hole patching, and sometimes no-stud alternatives for concrete or masonry walls. We work with renters throughout Capitol Hill, Queen Anne, and Bellevue to get a clean installation that meets lease requirements.
Seattle's apartment landscape ranges from older drywall units in Capitol Hill to concrete-walled high-rises in Queen Anne and new-construction units in Bellevue and Redmond. Each wall type requires a different approach to minimize damage.
Apartment Wall Types in Seattle
- Standard drywall with studs: podium buildings across Ballard, Capitol Hill and the U District are wood-framed above the garage, so two lags into studs leave only a few small holes.
- Concrete or CMU block walls: South Lake Union and Belltown towers often have concrete walls, which need a rotary hammer and wedge anchors after a rebar scan.
- Thin partition walls: newer Capitol Hill and Ballard mid-rises use steel studs, which take toggle bolts rated for steel.
- Cord cover raceways (no-drill option): if the lease forbids holes beyond the bracket, cords go in a painted raceway.
Pricing in Seattle
| Service | Price |
|---|---|
| TV up to 31" | from $55 |
| TV 32"–59" | from $169 |
| TV 60"+ | from $189 |
| Concrete or brick wall | +$69 |
| Cord cover raceway (no wall cutting) | +$69 |
| Mount supplied: fixed / tilting / full-motion | +$69 / +$79 / +$89 |
Get an Exact Quote for Your Seattle Home
Answer 3 quick questions, we'll text you a price in under 2 minutes.
Call +1 (206) 258-6297Service Areas in Seattle
Frequently Asked Questions
Can you mount a TV in my Seattle apartment?
Yes. We mount TVs in Seattle apartments every week and photograph the hole positions for move-out. Fasteners stay as small as your TV allows, and Seattle property managers can get our insurance certificate before the visit.
Will mounting a TV damage my Seattle apartment wall?
Expect four little bracket holes that a smear of filler hides before move-out. Old plaster in First Hill and Queen Anne walk-ups gets a scored outline first so it doesn't crack. We never open a rental wall unless you ask, and the cords travel in a paint-matched cover.
Can you mount a TV on a concrete wall in my Seattle apartment?
Yes. Belltown and South Lake Union towers usually have poured walls. We scan for rebar and conduit first, then use a rotary hammer and wedge anchors, and we send the building our certificate of insurance ahead of time.
How much does apartment TV mounting cost in Seattle?
Apartment mounting is $169 for a 32–59 inch TV and $55 for TVs up to 31 inches. A concrete wall adds $69, and a paintable cord cover adds $69. High floors and building paperwork add nothing to the bill.
Do you serve all Seattle apartment neighborhoods?
Yes, from Capitol Hill and Queen Anne to Ballard, the U District, South Lake Union, Belltown and Bellevue. Book in the morning and apartments near UW or Green Lake often get the TV up that day.
Apartment and Condo Installs in Seattle
Downtown, South Lake Union and First Hill are full of steel-stud and concrete walls. Renters also need to know what will be left behind when they move.
85" in a downtown Seattle apartment
A big panel in a tight downtown living room. We probed the wall first, many towers here use steel studs, then chose anchors to match and set the 85" high enough to clear the console without turning it into a neck-craner.
First Hill: 65" on a full-motion arm with in-wall wiring
The tenant had written building approval for in-wall routing, so the cables went inside the wall and finished with recessed plates. The full-motion arm lets the 65" swing between the living room and the kitchen in an open First Hill floor plan.
55" with a raceway near Denny Triangle
No cutting allowed in this Denny Triangle apartment, so the cables went into a slim paintable raceway running straight to the outlet. At move-out the raceway peels off and the two anchor holes are easy to patch.
Seattle Apartment Installs
Two swing arms and a shelf in a Kirkland apartment
A Kirkland apartment with an open living room and a big bedroom. Both TVs went on full-motion arms with paintable cord covers, since in-wall wasn't allowed, and a shelf went under the living-room TV.
The technician arrived 40 minutes after booking. Each arm was lagged into two studs and tested at full extension. The cord covers were routed with enough slack for the arms to swing.
Both TVs were tested, and the hole positions were noted for move-out.
Two TVs on metal studs in a Seattle apartment
The customer warned us the building had metal studs and asked us to bring the right hardware. The technician arrived 30 minutes after the call with toggle bolts rated for steel studs.
He spread each bracket across two studs. Both TVs were leveled and tested.
Customer Reviews
Michael did an excellent job with my TV installation! He was professional, punctual, and made sure everything was set up perfectly. He explained how everything works, cleaned up afterward, and went above and beyond to make sure I was happy with the setup. Highly recommend TVMOUNTEXPERTS for anyone needing a top-notch TV installation!
GREAT CUSTOMER SERVICE !
Wonderful service, technician, perfect job. Technician came on time, did the job in 30 minutes hung my TV and my sound bar! Highly recommended!
The TV installation was quick and easy. The technician did a great job mounting it securely and making sure everything worked. I’m happy with the service.
Amazing service! Highly recommend!







