About Our Denver Service
Mounting a TV on brick requires specialized tools and technique, masonry drill bits, the right anchor type, and knowing whether to drill into the brick face or the mortar joints. We mount TVs on brick walls throughout Denver including Cherry Creek, Capitol Hill, and LoDo.
Denver homes have a range of brick types: older Cherry Creek row homes with solid brick walls, Capitol Hill mid-century bungalows with brick accents, and newer Aurora construction with brick veneer. Each requires a different anchor approach.
Brick Types We Handle in Denver
- Solid brick walls: solid brick in pre-war Denver bungalows and Victorians takes anchors in the brick faces.
- Brick veneer over wood stud framing: brick veneer over framing in newer suburbs lets us lag through into the studs.
- Mortar joint drilling: we drill the brick, not the soft mortar, and check the dust color as we go.
- Painted or sealed brick: poured basement walls in Centennial and Parker take a rotary hammer and wedge anchors, but only once a scan shows no rebar in the way.
Pricing in Denver
| Service | Price |
|---|---|
| Brick, stone or concrete wall, 32"–59" TV | from $238 |
| Brick, stone or concrete wall, 60"+ TV | from $258 |
| 60"+ TV with 2 technicians | from $298 |
| Full-motion mount supplied | +$89 |
| Cord cover on masonry | +$69 |
| In-wall routing through masonry | custom quote |
Get an Exact Quote for Your Denver Home
Answer 3 quick questions, we'll text you a price in under 2 minutes.
Call +1 (720) 303-0909Service Areas in Denver
Frequently Asked Questions
Can you mount a TV on a brick wall in Denver?
Yes, on brick, moss rock and concrete across Denver, with a vacuum at every hole and anchors rated for the TV.
Do you drill into the brick or the mortar when mounting a TV in Denver?
Into the brick. Old Denver mortar crumbles, so anchors in it loosen over time; brick faces hold. We drill solid brick, check the dust color to confirm, and spread the bracket across several bricks so no single anchor carries the load.
How much does brick wall TV mounting cost in Denver?
Brick or masonry mounting in Denver is $238 for 32–59 inch TVs and $258 for 60 inches and up, including the $69 add-on. A cord cover on brick adds $69, and routing inside masonry is quoted on site after we see the wall.
Can you hide wires on a brick wall in Denver?
Generally in a slim painted channel, since Denver brick and moss rock won't let a fish tape slide through. That channel hugs a mortar joint or the wall's edge, and once it's painted most guests never spot it. In homes with a basement or crawl space below, we can sometimes route up through the floor instead.
Do you serve all Denver areas for brick wall TV mounting?
Yes, across the metro, including Victorian and bungalow brick in Capitol Hill, Baker, Highland and Park Hill, RiNo and LoDo lofts, and brick-veneer homes in Arvada, Aurora and Littleton. Brick installs in Baker, Sloan's Lake or Englewood can usually be slotted in the same day.
Masonry and Tile Installs in the Denver Metro
Brick is everywhere in Denver, 1950s ranches, older bungalows, fireplace surrounds. Tile and stone come up often in newer builds.
Tile wall and a swing-arm 77" in Parker
Combining a full-motion arm with a tiled wall is demanding: the arm puts leverage on the anchors and tile is brittle. We positioned the plate over solid backing and used anchors rated for the extended load.
75" on brick in southeast Aurora
A brick wall, a 75" set and a hammer drill. Four sleeve anchors into solid brick give more holding power than wood studs; the trick is keeping the holes out of the mortar.
Old TV down, 85" up on a brick fireplace in Lakewood
The old set came off the brick chimney first, along with its bracket. The new 85" needed a different hole pattern, so we drilled fresh anchor points, filled the old ones and hung the larger screen above the fireplace.
Brick, Stone and Tile Jobs in Denver
65" over a brick fireplace in Denver
A 1940s brick bungalow with a wood-burning fireplace that the owners use all winter. Heat was the main concern, so the technician measured the brick temperature with an infrared thermometer while the fire was going.
The technician arrived 35 minutes after the call. He set the TV higher than usual and used a tilting mount so the screen angles down. The holes went into the face of the brick, not the mortar, with a hammer drill and a vacuum. He set sleeve anchors, leveled the mount and tested the TV, then swept the brick dust off the hearth.
75" and 65" in Centennial, one on tile
The 65-inch went on a tiled wall in a kitchen nook, tilted down, and the 75-inch on drywall in the family room.
He arrived in Centennial at the start of the booked window. The tile was drilled slowly with a diamond bit and taped to avoid cracking. Both TVs were tested.
The tile on the nook wall was porcelain, which chips easily. The technician started each hole with a diamond bit and a few drops of water, then switched to a masonry bit.
Both TVs were tested, and the tile was wiped clean.
Customer Reviews
Vladimir did a wonderful job on this install. He was super polite and respectful. He came in with a smile and was mindful on where he placed all of his belongings. Everything came out so wonderful I love this set up. Thanks Vladimir.
Evan came out same day I called and did such an amazing job !!!
Victor was so professional and helpful. I’m so happy with my tv hung on the wall. Thank you Victor!!
Wonderful experience. Stan was professional, polite, and efficient. AND wore shoe covers!
Stan was amazing. Professional, efficient, and very nice. He even put booties on his shoes, extra plus!



