About Our Chicago Service
Mounting a TV above a fireplace in Chicago requires careful planning for heat management and wall structure. Chicago homes range from older masonry fireplaces to modern gas insert units, we handle all types daily throughout Lincoln Park, Wicker Park, and River North.
Heat is the main concern: we use a minimum 12-inch gap above the fireplace opening and measure actual heat output with a thermal gun before drilling. For wood-burning fireplaces, we often recommend a pull-down mount (MantleMount or similar) so the screen tilts toward eye level.
Fireplace Types We Mount In Chicago
- Gas insert fireplaces with drywall surrounds: Naperville, Schaumburg and other suburban builds usually have a gas insert in a framed chase, so two studs take the bracket.
- Standard brick fireplaces: bungalow-belt and North Shore homes often have brick fireplaces; anchors go into the brick faces.
- Stone fireplace surrounds: Wilmette, Winnetka and Glencoe homes often have fieldstone or limestone fireplaces. Anchors go into the soundest, flattest stones, and the plate is shimmed so the TV hangs dead level.
- Stucco or plaster surrounds: greystones and two-flats in Lincoln Park and Logan Square have plaster over brick above decorative mantels; we drill through into the brick.
Pricing in Chicago
| Service | Price |
|---|---|
| Above-fireplace mounting, 32"–59" TV | from $218 |
| Above-fireplace mounting, 60"+ TV | from $238 |
| Brick or stone fireplace wall | +$69 |
| In-wall wiring above the fireplace | +$149 |
| Pull-down / MantelMount-style mount | custom quote |
Get an Exact Quote for Your Chicago Home
Answer 3 quick questions, we'll text you a price in under 2 minutes.
Call +1 (312) 725-0755Service Areas in Chicago
Frequently Asked Questions
How high above a fireplace should a TV be mounted in Chicago?
At least 12 inches above the firebox, and higher in Chicago, where fireplaces burn from October to April. Chicago winters mean real fires from Halloween to St. Patrick's Day, so our tech lights yours and takes an infrared reading at the planned height first.
Can you mount a TV above a brick fireplace in Chicago?
Yes. Brick fireplaces are standard in bungalows and suburban colonials. We drill the brick faces with a vacuum at each hole and use anchors rated for the TV, never the crumbly old mortar.
Does Chicago weather affect TV mounting above a fireplace?
Long heating seasons matter more than the weather outside. We check the heat, find the flue in the chase and, with wood-burning fireplaces, suggest a mantel under the screen.
How much does fireplace TV mounting cost in Chicago?
Over a fireplace in Chicago, a 32–59 inch TV is $218 ($169 plus the $49 fireplace add-on) and 60 inches and up is $238. Brick or stone adds $69, and in-chase wiring adds $149. The price is the same in the city and the suburbs, and the quiz shows it first.
Do you serve all Chicago neighborhoods for fireplace TV mounting?
Yes. We mount over fireplaces from Lincoln Park, Lakeview and Andersonville to Evanston and the North Shore, west to Oak Park and Naperville, and south to Beverly, Hyde Park and Bolingbrook. Call before noon and a fireplace install from Edgewater to Beverly can often happen that day.
TV Over the Fireplace in Chicago Homes and Suburbs
Can you mount a TV over a vintage fireplace in a greystone or bungalow?
Yes. Many city fireplaces are decorative, with plaster over brick. We drill to the brick and use masonry anchors (+$69) so the plaster carries no load.
Fireplace TV mounting near me in Glenview, Bolingbrook or Lemont?
Yes. Suburban homes usually have a gas fireplace in a drywall chase, which is the simplest version: $218 for 32–59-inch TVs and $238 for 60 inches and up.
How much to mount a 65" above a brick fireplace with a tilting mount?
$386: $189 for the TV, $49 for the fireplace, $69 for brick and $79 for a tilting mount we supply.
Does winter fireplace use matter?
In Chicago fireplaces run for months, so we take heat seriously. We check the wall temperature at mounting height, keep at least 12 inches above the opening, and recommend a mantel or shelf below the TV.
Fireplace TV Installs Around Chicago
Chicago fireplaces range from decorative ones in vintage condos to working wood burners in the western suburbs. These three show how the mount and the wiring change with the setup.
85" over a working fireplace in Bolingbrook, with soundbar
An 85" on a tilting bracket above the firebox, a soundbar on our mount underneath, and a raceway for the cables. Lifting an 85" to mantel height is a two-person job, so two technicians came, one to hold and guide, one to lock the panel onto the bracket.
77" on an articulating arm above a Logan Square fireplace
A full-motion arm over the mantel lets the 77" pull out and drop toward the couch when needed. We added a soundbar and ran every cable inside the wall, which in a vintage two-flat means checking for plaster and old framing before opening anything.
Pull-down mantel mount in Forest Park
A mantel mount lets a 65" sit high when it is not in use and pull down to eye level for watching, the best answer to "the fireplace forces the TV too high." The customer chose a surface raceway rather than in-wall wiring.
Fireplaces in Chicago homes
Many pre-war buildings have decorative or sealed fireplaces with plaster-and-lath above them; suburban homes from the 1990s on often have a framed chase with drywall. We check what is behind the surface and how hot the wall gets before choosing anchors and height.
Chicago Fireplace Installs, Step by Step
A 77" swing arm over a fireplace with hidden wires
A Lincoln Park condo with a gas fireplace in the corner of the living room. The owner wanted the 77-inch on a full-motion arm so it can swing toward either the sofa or the dining table, with a soundbar from our stock and the cable inside the wall.
The technician arrived 40 minutes after booking. A swing arm over a fireplace has to clear the mantel at every angle, so he measured the mantel depth and the arm's reach first. He checked the wall temperature with the fireplace running, then scanned the chase and found it framed with wood and the vent pipe set well back.
The arm was lagged into two chase studs. The cable runs down inside the chase with a service loop so it follows the arm without pinching. The soundbar mounts to the arm, so it moves with the TV.
The arm was swung through its full range, the TV and soundbar were tested, and the hearth was vacuumed.
A 65" on a pull-down mantel mount in Forest Park
A Forest Park bungalow with a high fireplace mantel. The owner chose a pull-down MantelMount, so the 65-inch can come down to eye level.
The technician arrived at the booked time. He scanned the chase, lagged the mount into several studs because pull-down mounts carry more load, and adjusted the tension so it lowers smoothly and stays put. The cord runs down the side in a paintable cover.
Customer Reviews
Ivan did an amazing job mounting my TV! He was very professional, friendly, and respectful from start to finish. He made sure everything was mounted securely, answered my questions, and took the time to make sure I was happy with the placement before he finished. The TV looks great, and I really appreciated his positive attitude and excellent customer service. I would definitely recommend Ivan to anyone looking to have their TV mounted. Thank you again!
Good experience
Evan is one of the best!
Ivan was amazing on his service. Mounted my tv and soundbar in a breeze, professional look and awesome service. 100% recommend!
Helped me out a lot. Talked me through it so I wouldn't be confused on what was going on. Im pleased. Tried to upload photo but wouldn't let.

















