About Our Chicago Service
Mounting a TV on brick requires specialized tools and technique, masonry drill bits, the right anchor type, and knowing whether to drill into the brick face or the mortar joints. We mount TVs on brick walls throughout Chicago including Lincoln Park, Wicker Park, and River North.
Chicago homes have a range of brick types: older Lincoln Park row homes with solid brick walls, Wicker Park mid-century bungalows with brick accents, and newer Lakeview construction with brick veneer. Each requires a different anchor approach.
Brick Types We Handle in Chicago
- Solid brick walls: Chicago common brick in two-flats and lofts is soft; we use longer anchors in the centers of the bricks.
- Brick veneer over wood stud framing: suburban homes in Naperville, Schaumburg and Orland Park have brick veneer over framing. We find the studs and lag through the veneer into them.
- Mortar joint drilling: we drill brick faces only, never the soft lime mortar of old Chicago two-flats and greystones, which lets anchors loosen over time.
- Painted or sealed brick: painted brick in Pilsen and Bucktown rehabs hides the joints, so we test-drill to find solid brick before setting the anchors.
Pricing in Chicago
| Service | Price |
|---|---|
| Brick, stone or concrete wall, 32"–59" TV | from $238 |
| Brick, stone or concrete wall, 60"+ TV | from $258 |
| 60"+ TV with 2 technicians | from $298 |
| Full-motion mount supplied | +$89 |
| Cord cover on masonry | +$69 |
| In-wall routing through masonry | custom quote |
Get an Exact Quote for Your Chicago Home
Answer 3 quick questions, we'll text you a price in under 2 minutes.
Call +1 (312) 725-0755Service Areas in Chicago
Frequently Asked Questions
Can you mount a TV on a brick wall in Chicago?
Yes. We mount on common brick, face brick, painted brick and greystone across Chicago, with a vacuum at every hole. Loft brick in the West Loop and Fulton Market, two-flat party walls and suburban veneer all get anchors chosen for them.
Do you drill into the brick or the mortar when mounting a TV in Chicago?
Into the brick. Two-flats and greystones were laid with soft lime mortar, and a fastener sitting in a joint backs out under a TV's weight over time. Our bit stays in solid common brick, and a broad plate spreads the set so no single fastener carries it.
How much does brick wall TV mounting cost in Chicago?
Brick wall TV mounting in Chicago is $238 for a 32–59 inch TV and $258 for 60 inches and up, including the $69 masonry charge. A cord cover on brick adds $69. Running cable inside a Chicago brick wall gets priced after we see it.
Can you hide wires on a brick wall in Chicago?
In a painted channel, because brick won't take a fish tape. The channel follows a mortar joint or the wall's corner and fades from view once painted. A framed partition nearby can sometimes carry an in-wall run instead.
Do you serve all Chicago areas for brick wall TV mounting?
Yes. Brick installs cover Pilsen, Bucktown, Wicker Park, the West Loop, Lakeview, Bridgeport and Hyde Park, plus suburban brick in Naperville, Oak Park and Evanston. Brick installs in Pilsen, Bucktown and Bridgeport can usually happen the same day.
Brick, Tile and Masonry Mounts in Chicago
Brick is everywhere in Chicago, exposed walls in lofts, brick bungalows, North Shore fireplaces, and tile shows up around fireplaces and in remodeled condos. Each takes different bits and anchors.
Two TVs on brick walls in Wilmette
Two separate brick walls in one house. On brick we drill with a hammer drill into the solid brick itself, use sleeve anchors, and check each hole for crumbling before loading it, older brick can be soft in places.
Two 85" TVs, one on a tiled wall, in Lakeview
One 85" went on standard drywall; the second, an 85" Frame, went on tile. Drilling tile without cracking it means a diamond or carbide tile bit, slow speed, and tape on the surface so the bit does not walk.
55" on tile above a fireplace in Uptown
A tiled fireplace surround in a lakefront building. Tile over masonry needs the hole to pass cleanly through both layers, and the anchor to bite in the masonry behind, not in the tile, which would crack under load.
Brick, Tile and Concrete Jobs in Chicago
Two 65" TVs on brick walls in Wilmette
A 1920s Wilmette house with brick interior walls in the den and the sunroom. Both rooms got a 65-inch.
The technician arrived 40 minutes after booking. He drilled into the brick faces, not the mortar, with a hammer drill and a vacuum at the bit. In the sunroom, the brick was the original exterior wall, so he checked for an old electrical box behind the paint before drilling.
Sleeve anchors went in, both brackets were leveled, and both TVs were tested. The brick dust was swept off the windowsills.
A 55" on a tiled fireplace in Chicago
A condo with a tiled fireplace surround. The technician arrived 35 minutes after the call, checked the heat with the fireplace running, and drilled the tile with a diamond bit, then masonry behind it.
The TV was hung, leveled and tested, and the tile was wiped clean.
Customer Reviews
Great set up by the team and it was quick!
Easy experience
Evan’s work was great and super quick. He was also very kind and sociable and did exactly what I requested!
Evan arrived promptly ready to get the job done. Made suggestions and offered the best solutions. I will request him EVERY TIME!!!! Mounted 2 60+ TVs quickly and effectively. He is nothing short of AMAZING…. Give him a raise and more stars😉.
Looks amazing and was quick and efficient



