About Our San Diego Service
Mounting a TV above a fireplace in San Diego requires careful planning for heat management and wall structure. San Diego homes range from older masonry fireplaces to modern gas insert units, we handle all types daily throughout La Jolla, Pacific Beach, and Mission Hills.
Heat is the main concern: we use a minimum 12-inch gap above the fireplace opening and measure actual heat output with a thermal gun before drilling. For wood-burning fireplaces, we often recommend a pull-down mount (MantleMount or similar) so the screen tilts toward eye level.
Fireplace Types We Mount In San Diego
- Gas insert fireplaces with drywall surrounds: Carlsbad, Chula Vista and Rancho Bernardo tract homes usually have a gas insert in a framed chase; the bracket lags into two studs.
- Standard brick fireplaces: older Clairemont, Bay Park and La Mesa ranches from the '50s and '60s often have a full brick fireplace. Anchors go into the brick faces, sized for the TV and for earthquake loads, with a vacuum at the bit.
- Stone fireplace surrounds: ledgestone and slump-stone surrounds in East County homes get anchors in solid stone or block, with the bracket shimmed flat.
- Stucco or plaster surrounds: Spanish-style houses in North Park and Kensington have smooth stucco or tile; tile gets a diamond bit before anchoring into framing.
Pricing in San Diego
| Service | Price |
|---|---|
| Above-fireplace mounting, 32"–59" TV | from $218 |
| Above-fireplace mounting, 60"+ TV | from $238 |
| Brick or stone fireplace wall | +$69 |
| In-wall wiring above the fireplace | +$149 |
| Pull-down / MantelMount-style mount | custom quote |
Get an Exact Quote for Your San Diego Home
Answer 3 quick questions, we'll text you a price in under 2 minutes.
Call +1 (619) 841-1644Service Areas in San Diego
Frequently Asked Questions
How high above a fireplace should a TV be mounted in San Diego?
Keep at least 12 inches between the firebox and the screen, more if the wall runs hot. San Diego fireplaces see light use, but we still read the wall temperature with the unit on before choosing the height.
Can you mount a TV above a brick fireplace in San Diego?
Yes. Brick fireplaces are common in 1950s–60s San Diego ranches. A vacuum nozzle sits under the bit as it enters each brick, and the anchors are rated for both the TV and a Rose Canyon Fault shake.
Does San Diego weather affect TV mounting above a fireplace?
Mild weather isn't a factor here; earthquakes are. Every bracket lands on two studs or solid masonry, never a single anchor, and we leave slack in the cables so a shake can't pull them out of the ports. Salt air near the coast doesn't affect an indoor mount.
How much does fireplace TV mounting cost in San Diego?
A 32–59 inch TV over a fireplace in San Diego is $218 ($169 plus the $49 fireplace add-on), and 60 inches and up is $238. Stone, brick or tile adds $69, and running the wires inside the chase adds $149. The quiz shows your total before we drive out.
Do you serve all San Diego neighborhoods for fireplace TV mounting?
Yes. We mount over fireplaces from Oceanside and Carlsbad to Encinitas, La Jolla, Clairemont, North Park and Point Loma, and east to La Mesa, El Cajon and Santee, plus Chula Vista. Call in the morning and a fireplace install between Oceanside and Chula Vista can often happen that afternoon.
Above-Fireplace TV Mounting in San Diego County
Fireplace TV installation near me in Oceanside, Encinitas or Chula Vista?
Yes, those are regular fireplace addresses for us. Most homes have a gas fireplace in a tile or stucco surround.
Tile surround?
We drill tile with diamond bits to avoid cracking, then anchor into solid material behind it. Stone and masonry add $69.
Price with hidden wires
A 65-inch over a framed chase with in-wall wiring is $387: $189 for the TV, $49 for the fireplace and $149 for the wiring.
Earthquake-safe mounting
We use lag bolts into studs or masonry anchors, sized for the TV weight.
Above-Fireplace TV Mounting in San Diego
Most San Diego fireplaces are gas units, many in Carmel Valley and North County homes built in the last thirty years. The questions are always height, heat and how to hide the cables.
65" over the fireplace with an in-wall run in Carmel Valley
The TV went over a gas fireplace and the cables went inside the wall to a recessed plate beside the firebox. We confirm there is framing above the box and that the wall above stays cool enough before committing to the spot.
55" on an articulating arm above the fireplace in La Mesa
A full-motion arm turns a high fireplace spot into a flexible one: the screen pulls out and angles toward the kitchen or the couch. Wiring was routed inside the wall so nothing hangs below the TV.
58" on a tilting mount above the fireplace in Valley Center
Rural North County homes often have tall mantles. A tilting bracket set the screen at a comfortable downward angle so viewers are not craning their necks.
San Diego Fireplace Installs, Step by Step
A 65" over a stone fireplace with a soundbar in El Cajon
An El Cajon ranch with a ledgestone fireplace that runs to the ceiling. The owner wanted the cables hidden, if possible, and a soundbar.
The installer arrived 45 minutes after booking. Ledgestone is a veneer over framing, so he could drill through it into studs and fish the cable down the framed cavity behind it, which is rare with stone. He confirmed the vent pipe position before cutting.
The soundbar sits just above the mantel ledge.
A 75" with the openings already cut in El Cajon
The owner had already cut the openings above the fireplace. The installer arrived at the booked time, checked the bay, ran the cable through and hung the 75-inch.
Customer Reviews
Alex was great, very fast and clean installation!
Awesome services, I recommend this company for anyone looking for quick and quality work.
Best experience Ivan was professional quick took 2mins and it was Best 2mins thanks So much
Ivan was very professional and helpful.
Alex was very friendly and took the job seriously. He was methodical, careful, and double-checked his work at every step.

















