About Our Riverside Service
Mounting a TV on brick requires specialized tools and technique, masonry drill bits, the right anchor type, and knowing whether to drill into the brick face or the mortar joints. We mount TVs on brick walls throughout Riverside including Wood Streets, Alessandro Heights, and Canyon Crest.
Riverside homes have a range of brick types: older Wood Streets row homes with solid brick walls, Alessandro Heights mid-century bungalows with brick accents, and newer Moreno Valley construction with brick veneer. Each requires a different anchor approach.
Brick Types We Handle in Riverside
- Solid brick walls: 1920s brick in Wood Streets and downtown homes near the Mission Inn is soft, so longer anchors go into the centers of the bricks, sized for earthquake loads.
- Brick veneer over wood stud framing: Moreno Valley and Corona homes often have brick veneer over wood framing. The tech finds the wood studs hiding behind the brick skin and runs long lags through it into them.
- Mortar joint drilling: we drill brick faces, not the mortar joints. Old Riverside mortar is soft, and anchors in a joint can loosen over time or in a quake.
- Painted or sealed brick: painted brick and slump block in Canyon Crest and La Sierra remodels hide the joints and hollow cells, so we test-drill before setting the anchors.
Pricing in Riverside
| Service | Price |
|---|---|
| Brick, stone or concrete wall, 32"–59" TV | from $238 |
| Brick, stone or concrete wall, 60"+ TV | from $258 |
| 60"+ TV with 2 technicians | from $298 |
| Full-motion mount supplied | +$89 |
| Cord cover on masonry | +$69 |
| In-wall routing through masonry | custom quote |
Get an Exact Quote for Your Riverside Home
Answer 3 quick questions, we'll text you a price in under 2 minutes.
Call (951) 403-8844Service Areas in Riverside
Frequently Asked Questions
Can you mount a TV on a brick wall in Riverside?
Yes. We mount TVs on brick, slump block and stone across Riverside, from Wood Streets fireplaces to block walls in Moreno Valley. We use carbide bits, keep a vacuum at every hole, and choose anchors sized for the wall, the TV and Southern California earthquakes.
Do you drill into the brick or the mortar when mounting a TV in Riverside?
Into the brick. Old Riverside mortar is soft and sandy, and an anchor in a joint can loosen over time or let go in an earthquake. Slump block gets probed until we hit a grout-filled cell, and that's where the anchors go. The plate spans several bricks, so the TV's weight never hangs on one anchor.
How much does brick wall TV mounting cost in Riverside?
Brick wall TV mounting in Riverside starts at $238 for a 32–59 inch TV and $258 for 60 inches and up, the standard price plus the $69 hard-wall charge. A cord cover on brick adds $69, and routing inside a brick wall is quoted on site.
Can you hide wires on a brick wall in Riverside?
Yes, normally in a thin channel brushed to match, following a mortar line or the wall's edge. If there's a framed wall beside the brick or attic access above, we can sometimes route the cables inside instead. Fishing cable inside block or brick gets priced after a look.
Do you serve all Riverside areas for brick wall TV mounting?
Yes, we serve all Riverside neighborhoods, including the Wood Streets, downtown, Alessandro Heights, Canyon Crest and La Sierra, plus Moreno Valley, Corona and Norco. Most days a brick job can still be done before dinner.
Stucco, Stone and Block Walls in the Inland Empire
Real brick is rare in Riverside County houses; hard surfaces here are stucco, faux stone fireplace surrounds and concrete-block garden and garage walls.
TV on an exterior stucco wall under a Riverside patio cover
Stucco is a hard skin over wire lath and framing. We drill through it cleanly so it does not crack, and anchor into the studs behind rather than relying on the stucco itself.
Block-wall garage gym TV in Moreno Valley
Concrete masonry block takes sleeve anchors set with a hammer drill. We aim for solid block, not the hollow cells, and use a raceway for the cables since the wall cannot be fished.
Faux-stone fireplace face in a Menifee great room
Manufactured stone veneer is glued over a backing wall. Anchors go through the veneer into the framing behind, and the cable path is planned around the stone.
Stucco, Stone and Block Jobs in the Inland Empire
A 65" on a block wall in Riverside
A Riverside house with a block interior wall. The installer arrived 40 minutes after booking and anchored into grout-filled cells.
Sleeve anchors went into grout-filled cells only. The 65-inch hangs centered on the sofa.
A 55" on stucco in Fontana
A Fontana house with an interior stucco wall in the den. The installer came at 3 p.m. as booked, found the studs through the stucco, drilled the stucco skin with a masonry bit and drove lags into the studs. The 55-inch hangs centered on the couch.
Customer Reviews
Idris and Stephen did an outstanding job mouthing my TV. They were careful, knowledgeable, and professional.
Evan did an excellent job with my TV mount installation on 12/07. He was extremely professional, kind, and patient throughout the process. What really stood out was his attention to detail, he noticed I wasn’t fully satisfied with the height even before I said anything and lowered the mount to make sure it was perfect. That level of care and professionalism is rare. Highly recommend Ivan.
Quick and very respectful! Quality job!
Very fast and efficient!!! He was super professional and honestly I've never been more sure that my TV was in safe hands. Also the BEST price in the area! The appointment was quick and easy to make and he was extremely punctual with great communication! 15/10
Did a great job! On time and sturdy mount. Very happy



