About Our Portland Service
Portland homeowners care about clean interiors, dangling TV cables are the first thing guests notice. We route them invisibly throughout Pearl District, Alberta Arts District, and Hawthorne.
Portland's mix of construction types affects the approach. Older homes in Pearl District often have plaster walls or older drywall with inconsistent stud spacing. Newer construction in Beaverton and Hillsboro uses standard 16-inch OC framing, making in-wall routing straightforward.
Wire Concealment Methods for Portland Homes
- In-wall routing with recessed outlet: leads drop through old-growth fir stud bays to a recessed plate behind the screen, since most Rose City homes have hollow framed walls.
- Cord cover raceways: Pearl District and Lloyd District apartments usually need a paintable raceway, because leases rule out cutting.
- In-wall routing above fireplace: after we find the flue, the cable drops inside the fireplace chase to a plate by the hearth. $149.
- Baseboard channel routing: older Portland houses have firestops and lath, so we bore through them with a long flex bit, or use a low baseboard channel.
Pricing in Portland
| Service | Price |
|---|---|
| Cord cover raceway (no drywall work) | +$69 |
| In-wall concealment with recessed power outlet | +$99 |
| In-wall routing above a fireplace | +$149 |
| TV mounting 32"–59" + in-wall wiring | from $268 |
| TV mounting 60"+ + in-wall wiring | from $288 |
Get an Exact Quote for Your Portland Home
Answer 3 quick questions, we'll text you a price in under 2 minutes.
Call +1 (971) 380-5323Service Areas in Portland
Frequently Asked Questions
Can you hide TV wires in my Portland home without cutting the wall?
Yes. A paintable raceway hides the cords without opening the wall, which most Portland and Vancouver leases allow. Our installer brushes the channel in your paint on site; leaving a Pearl District lease means four screws out and pinholes to dab, so the deposit returns whole.
How much does TV wire concealment cost in Portland?
A cord cover is $69. In-wall routing with a recessed outlet is $99, and $149 above a fireplace. The price is the same on both sides of the Columbia.
Do you need to cut drywall to hide TV wires in Portland?
Going inside the wall takes one cutout hidden by the screen and one at outlet height, each capped with a recessed plate. In old plaster we score the outline first so it doesn't crack, and a vacuum catches the dust as we cut. The surface-channel route leaves your plaster uncut.
Can you hide wires on a brick or stone wall in Portland?
Brick and stone can't be fished, so a slim raceway runs along the masonry and is painted to match. A framed wall next to the fireplace can take an in-wall run instead.
Do you serve all Portland areas for wire concealment?
Yes, across the Portland metro and Clark County, Washington, including the Pearl, Northwest, Hawthorne, Alberta, Sellwood, Beaverton, Lake Oswego, Tigard and Vancouver. Phone before noon and a cord job in Sellwood, Beaverton or Gresham usually wraps that afternoon, with the window sent by text.
Cable Hiding Jobs Around Portland
We run cables inside the wall where the framing allows, and use paintable raceways where it does not, or where renters cannot cut drywall.
NE Portland: 65" with the cables inside the wall
A single in-wall run from a recessed box behind the TV to a plate near the console. In older NE houses we watch for horizontal blocking and old knob-and-tube remnants before drilling.
Gresham: 60" on a tilting mount, wires hidden
Tilting mounts are forgiving on height, and an in-wall run keeps the space below clean. We left a little slack behind the panel so the tilt does not tug on the HDMI.
Vancouver: two TVs on swing arms, both in raceways
A 55" and a 42" on full-motion mounts with cord covers running to the outlets. Raceways suit arms well because the cable can exit right at the mount without new holes.
Plaster and lath in old Portland houses
Plaster cracks if cut carelessly. We score it, drill slowly and keep openings small, or recommend a paintable raceway when the wall is too fragile for in-wall work.
Hidden-Wire Jobs in Portland
A swing arm and soundbar on a concrete wall in Portland
A Lloyd District condo where the 65-inch moved from a fixed bracket to an articulating arm on the concrete wall, with a soundbar that travels with it.
The installer arrived 35 minutes after the call. Concrete can't be fished, so a paintable raceway was the cleanest option. Before drilling, he scanned for rebar and post-tension cables; condo slabs and walls can hide tensioned steel that must never be drilled. He shifted one anchor an inch after the sensor flagged metal.
Wedge anchors went in with a rotary hammer and dust shroud. The soundbar bracket clips to the arm, and the raceway leaves slack for the swing.
A 65" Frame with the cable inside in Beaverton
A Beaverton family room where the Frame needed to look like art, so the One Connect cable had to vanish.
The installer arrived at the scheduled time and dropped the thin cable through one bay to the media cabinet. The slim bracket was leveled with a laser.
Customer Reviews
Roman was efficient and did a great job!! Highly recommend!
Konstantinos is professional and efficient, he did a great job.
Thanks Vadym, GREAT job 👍
Excellent work by Evan! He was knowledgeable and made sure our TV was exactly how we wanted it to be mounted. Highly recommend
Quick installation, perfect




