About Our Orlando Service
Mounting a TV on brick requires specialized tools and technique, masonry drill bits, the right anchor type, and knowing whether to drill into the brick face or the mortar joints. We mount TVs on brick walls throughout Orlando including Dr. Phillips, Winter Park, and Lake Nona.
Orlando homes have a range of brick types: older Dr. Phillips row homes with solid brick walls, Winter Park mid-century bungalows with brick accents, and newer Kissimmee construction with brick veneer. Each requires a different anchor approach.
Brick Types We Handle in Orlando
- Solid brick walls: concrete block walls are standard in Central Florida homes and have hollow and grouted cells. Only grout-filled cells take anchors, and we locate them first.
- Brick veneer over wood stud framing: stacked-stone veneer on Dr. Phillips and Windermere accent walls is drilled through into the solid block behind it.
- Mortar joint drilling: interior stucco is drilled with a masonry bit first, then lags go into the wood studs behind the stucco.
- Painted or sealed brick: old brick in downtown Orlando and Sanford buildings gets longer anchors in the brick faces.
Pricing in Orlando
| Service | Price |
|---|---|
| Brick, stone or concrete wall, 32"–59" TV | from $238 |
| Brick, stone or concrete wall, 60"+ TV | from $258 |
| 60"+ TV with 2 technicians | from $298 |
| Full-motion mount supplied | +$89 |
| Cord cover on masonry | +$69 |
| In-wall routing through masonry | custom quote |
Get an Exact Quote for Your Orlando Home
Answer 3 quick questions, we'll text you a price in under 2 minutes.
Call +1 (407) 630-9990Service Areas in Orlando
Frequently Asked Questions
Can you mount a TV on a brick wall in Orlando?
Yes, on concrete block, stone, stucco and brick across Central Florida, with a vacuum at every hole. Each wall gets the anchor that suits it, so the TV stays solid through storm season and years of humidity.
Do you drill into the brick or the mortar when mounting a TV in Orlando?
Into solid material: grouted block cells or brick faces. Empty block cells and mortar joints won't carry a TV, so a test hole and the dust off the bit confirm solid material before any anchor goes in.
How much does brick wall TV mounting cost in Orlando?
Masonry mounting in Orlando is $238 for a 32–59 inch TV and $258 for 60 inches and up, including the $69 add-on. A cord cover on block adds $69. Routing cable inside CBS block is priced once we see the wall.
Can you hide wires on a brick wall in Orlando?
Through a painted channel, because block and brick won't take a fish tape. Tinted to the block, that track runs beside a joint or the corner and all but vanishes. An interior framed wall nearby sometimes gives a cleaner route.
Do you serve all Orlando areas for brick wall TV mounting?
Yes, across Central Florida, including Orlando, Winter Park, Dr. Phillips, Windermere, Kissimmee, Lake Nona, Oviedo and Clermont. Same-day block and stone jobs are usually possible.
Brick and Stone TV Mounting in Orlando Suburbs
Seminole County has plenty of brick and stone feature walls. Three masonry installs from Longwood and Apopka:
Full-motion 65" on stone in Longwood
Natural stone faces are irregular, and a full-motion arm magnifies any wobble. We picked solid stones for every anchor, shimmed the wall plate flat, and tested the arm at full extension before hanging the TV.
70" on brick at Sweetwater, Longwood
A brick wall in an established Longwood home. Sleeve anchors in the face of the brick, never the mortar, and a level line taken off the room rather than the brick courses, which are rarely perfectly straight.
65" on a swing arm over brick in Apopka
Same idea, different house: a full-motion bracket on brick. The heavier the leverage, the more anchors share the load, so the wall plate went up with every hole filled.
Stone, Stucco and Brick Jobs in Orlando
A 65" arm on a stone wall in Longwood
A Longwood family room with a stacked-stone feature wall. An arm on stone needs anchors in solid stone or the block behind, never in the mortar.
The installer arrived 40 minutes after booking, drilled through the veneer into the block and set wedge anchors. The arm was tested at full reach.
Four 3/8-inch wedge anchors hold the arm's plate in the block behind the veneer, more than a flat bracket would need. He pulled the arm to full reach with the 65-inch on it and pushed on the corner to confirm there was no movement.
A 65" arm on stucco in Orlando
An interior stucco wall. Our man came by at 4 p.m., the time the owner picked, and drilled through the stucco into the studs.
Stucco over framing hides the studs, so he confirmed each one with a thin pilot bit before drilling the larger lag holes, and used a masonry bit only for the stucco skin to keep it from cracking around the bolt heads. The arm was tested at full extension.
Customer Reviews
Alexandr was fantastic. He got everything done perfectly, was very nice and polite, and left everything both clean and how it was before he arrived. I would definitely recommend both him and the company
Evan is a perfectionist, punctual and an excellent communicator! I’ve used him 3 times and recommend him to friends!
Evan helped me out very nicely, with good consultation and suggestions.
Evan great service. Excellent job
Excellent work! I’m so glad I didn’t have to do this myself. It looks great.



