Brick walls are stronger mounting surfaces than drywall: but they require completely different tools, anchors, and technique. Use a standard drill on brick and you'll burn out the motor without making progress. According to Simpson Strong-Tie's anchor load testing data, properly installed 3/8" sleeve anchors in solid brick hold 400–600 lbs each in shear, far more than any residential TV mount requires. Here's the complete guide.

Brick vs. Drywall: What's Different

Three things change when mounting on brick instead of drywall:

Tools and Materials You Need

Hammer drillNot optional, a standard drill won't work
Masonry drill bits (3/8")SDS or standard, matched to anchor size
Sleeve anchors or wedge anchorsMinimum 3/8" diameter, 200+ lb rating
TV wall mountRated for your TV's weight + 2× safety margin
Level (digital preferred)Critical, brick has no reference lines
Tape measure + pencilMark hole positions precisely
Wrench setFor tightening masonry anchor bolts
Vacuum or drop clothBrick dust cleanup

Do not use plastic expansion anchors on brick. They're rated for drywall loads and will pull out under a TV's repeated load cycles (vibration, repositioning). Always use metal masonry anchors, sleeve anchors or wedge anchors.

Brick vs. Mortar: Which to Drill?

You have two options: drill into the brick face itself, or drill into the mortar joints between bricks.

Mortar joints are usually preferred because:

The tradeoff: mortar can be inconsistent, old homes may have soft mortar that doesn't hold as well. If mortar crumbles when drilled, switch to drilling the brick face with appropriate masonry anchors.

Step-by-Step: Mounting on Brick

1

Find the right mounting height

Mark the target center height for the TV with a pencil. For most living rooms, TV center should be at seated eye level, about 42–48" from the floor. Use a level to draw a horizontal reference line at mount-top height.

2

Identify your drill locations

Hold the wall mount bracket against the wall at your target position. Mark each hole location with a pencil. Decide whether to drill into brick or mortar based on where the holes fall. Try to keep all holes on one type (all mortar or all brick) for consistency.

3

Drill pilot holes with the hammer drill

Set the hammer drill to rotary hammer mode. Use a 3/8" masonry bit (match to your anchor diameter). Drill straight in, don't angle. Depth should equal anchor length plus 1/4". Keep the drill moving at steady pressure; don't force it. Clear dust every few seconds by pulling the bit out slightly.

4

Clean out the holes

Use a vacuum or blow out each hole with compressed air. Loose dust prevents anchors from seating properly and reduces holding strength.

5

Insert masonry anchors

For sleeve anchors: insert the anchor into the hole and hand-tighten the nut until snug, then torque with a wrench until the sleeve expands and grips the brick. Don't overtighten, you can crack mortar. The anchor should feel solid with no movement.

6

Attach the mount bracket

Thread bolts through the mount into the anchors. Tighten gradually and evenly across all bolts. Check level before final tightening. Pull-test the mount by applying firm outward and downward force, it should not flex or move.

7

Hang the TV

Attach the mount plate to the TV per the bracket instructions. Have a second person help lift the TV, especially for 55"+ screens. Hook onto the wall bracket and ensure it's fully seated and locked.

Common Mistakes on Brick Mounting

When to Call a Professional

Brick mounting is DIY-feasible if you have the right tools and time. Consider professional installation if:

Have a Brick Wall? We Handle It Daily

TV Mount Experts installs on brick, concrete, stone, and all masonry surfaces. Same-day available from $238 for a 32–59 inch TV.

Call: (213) 556-4558

Frequently Asked Questions

Can you mount a TV on painted brick?

Yes. Painted brick mounts the same way as unpainted, the paint doesn't affect anchor holding strength. The main difference is aesthetics: drilling will chip the paint slightly around the hole. Use a masonry bit with the hammer drill as usual.

What's the weight limit for brick mounting?

Properly installed masonry anchors in solid brick hold 200–500 lbs each. A 4-anchor installation provides 800–2,000 lbs of theoretical holding strength, far exceeding even the heaviest consumer TVs (110" commercial displays weigh ~200 lbs). The practical limit is the mount bracket's weight rating, not the brick.

How do I fill the holes if I move the TV?

For mortar joint holes: use pre-mixed mortar or a masonry patch compound, color-matched to your existing mortar. For brick face holes: masonry patch compound works, but color-matching is harder on aged brick. Professional tuck-pointing can make repairs nearly invisible.