Wall-mounted TVs look sleek, until a bundle of cables ruins the aesthetic. According to a 2025 Houzz Home Trends Survey, visible cables are the #1 complaint homeowners report about their TV installation, cited by 64% of respondents who mounted a TV themselves. Here are the four main methods to hide TV wires, ranked from easiest to most polished, with honest takes on each.
The 4 Methods, Ranked
Method 1: Cord Cover Raceway
Plastic or aluminum channels that attach to the wall surface and cover cables. They run vertically from the TV down to the outlet or media console. Available in white and paintable versions. Cost: $10–$40. Time: 20–30 minutes.
Pros: No wall damage, works on any wall type (brick, concrete, drywall), renter-friendly, cheap.
Cons: Visible hardware, you'll see the channel on the wall. At close range it's obvious. Not suitable for high-end installs.
Method 2: Cable Sleeve / Fabric Wrap
Flexible fabric or spiral wrap bundles all cables together into a single neat tube. Best for the section of cables that runs from the TV to the back of a media console, where cables are grouped but not wall-mounted. Cost: $5–$20. Time: 10 minutes.
Pros: Extremely cheap and easy. Good for consoles and desks.
Cons: Doesn't eliminate visibility, it just tidies a bundle. Not useful for a fully wall-mounted clean look.
Method 3: Behind-the-Wall Cable Kit
Two wall plates with grommets create an entry and exit point for cables. You route cables through the wall cavity between studs, no cutting into drywall beyond two small holes (about 2" diameter). This is the most popular DIY wire concealment method. Cost: $20–$50 for the kit + tools. Time: 1–2 hours.
Pros: Nearly invisible result. Only two small plates visible on the wall. No major drywall work.
Cons: You can run data/HDMI cables this way, but NOT power cables, running AC power inside walls without a licensed electrician is a code violation in most US states. This method works for routing HDMI, Ethernet, and speaker wires only.
Method 4: Professional In-Wall Wire Concealment
A technician routes all cables, including power, cleanly inside the wall, with recessed outlet plates behind the TV and at the floor level. The result: zero visible cables, zero visible plates (or minimal flush-mount plates). This is what you see in magazine photos and showrooms. Cost: $69 for a cord cover, $99 in-wall with a power outlet, or $149 above a fireplace, as an add-on to TV mounting.
Pros: Completely clean look. Power cable safely handled by a licensed installer. Proper in-wall recessed outlets.
Cons: Requires cutting into the wall. Not suitable for concrete, brick, or tile walls without specialized techniques. Apartment renters need landlord permission.
Important: Running power cables inside a wall without a permit or license is a code violation in most US states. It also voids homeowner's insurance for fire claims. TV Mount Experts' wire concealment service handles power routing safely and correctly.
Which Method Should You Choose?
Renters or apartments
Method 1 (raceway) is your best bet, no wall damage, easy to remove. If you need a cleaner look, the cable sleeve (Method 2) handles bundling at the console level. Skip the wall kit and professional in-wall for rentals unless you have landlord permission for small holes.
Homeowners on a budget
The behind-the-wall cable kit (Method 3) gives a nearly professional result for $30–$50 in materials. You'll handle the HDMI/Ethernet routing yourself and leave the power cable visible or use a raceway for the power section only.
New TV mounting or renovation
Add professional wire concealment (Method 4) to your TV mounting job. When a technician is already on-site drilling into the wall for the mount, the incremental cost and work for in-wall concealment is minimal. The result is dramatic.
Brick, concrete, or tile walls
In-wall routing is typically not feasible without major masonry work. Surface raceway (Method 1) painted to match the wall is the standard approach. TV Mount Experts has specific techniques for clean cable management on masonry walls.
What Cables Actually Need to Be Hidden?
For a standard TV setup, you typically have:
- Power cable: the biggest visual offender; runs to the outlet
- HDMI cable(s): for cable box, streaming stick, gaming console, soundbar
- Ethernet cable: if wired instead of Wi-Fi
- Optical/HDMI-ARC: if using an external soundbar
Wireless streaming sticks (Roku, Fire TV, Chromecast) eliminate HDMI cables entirely, the stick plugs directly into the TV. Wi-Fi eliminates Ethernet. This can reduce your visible cables to just one: the power cable.
Pro Tip: Wireless Everything First
Before spending money on cable management, audit what can go wireless. A streaming stick + Wi-Fi + optical soundbar means only one cable (power) needs management. That's a raceway or simple in-wall power kit vs. a full 4-cable concealment job.
Want Zero Visible Cables?
Add professional wire concealment to your TV mounting: $69 cord cover, $99 in-wall, $149 above a fireplace. Same-day service available.
Call: (213) 556-4558Frequently Asked Questions
Can I run HDMI cables inside my wall?
Yes, HDMI, Ethernet, coaxial, and other low-voltage cables can be routed inside walls in most US states without a permit or electrician. However, power cables (AC) require a licensed electrician in most jurisdictions. The key distinction is voltage: low-voltage data cables are fine; mains power requires a pro.
What about brick or concrete walls?
In-wall routing through masonry is usually impractical without core drilling, which is expensive and messy. The standard solution is a surface-mount raceway painted to match the wall, which looks surprisingly clean from normal viewing distance.
How long does professional wire concealment take?
When added to a TV mounting job, in-wall wire concealment typically adds 30–60 minutes. As a standalone service on existing TV installations, it takes 60–90 minutes depending on the cable count and wall construction.